There are many signs that make it easy to recognize those problems. The paint and the gun tip of the gun have a decisive effect on the dosage of paint and spray, so it is necessary to know how to handle situations encountered. When conducting paint. The following easy -to -encounter situations will help you have the most overview to offer the right solution.
1.No paint
-The steam tube test
-Check whether the paint of the gun is shaky or not, if there is a thoroughly soak
-Check the needle needle on the spray gun
-Check the mixed paint to see if there is dust falling in or not, proceed to filter if necessary
2.Son has a large seed
-Check out the operational environment
-Check the gun to see if there is a sediment in the paint lead
-Check the paint to see if there is any problem
3. Uneven gun spray
- Check the spray size knob
- Check whether the gun's gasket is clogged, if there is a soaked gasket in the solvent and then use the needle of the wind holes
- Check the needle hole to see if it is clogged or not
Note:
-Always keep the gun clean after operating, in case of good business with the paint systems must be more carefully cleaned.
-When cleaning the electrostatic spray gun unnecessary to remove all parts of the gun, it should only be cleaned with paints that go through
-The thoroughly, avoiding strong impact on the needle tip adjusting the amount of paint
